Applicable scenarios of the Stand Square Heater
The Stand Square Heater is designed for large-area heating. It has a powerful power of 13KW and a gas consumption of 945g/hr, which means that it can provide efficient heating for larger spaces in a short time. The fuel types of this heater support liquefied gas (LPG), propane, and butane, etc., which can meet the needs of different users and are suitable for a variety of gas sources.

From the physical dimensions of the product, its total height reaches 2270mm, and the panel size is 342+464x849mm (H). The overall design is relatively large and suitable for open spaces or large areas. Therefore, the Stand Square Heater is mainly used in outdoor environments and large indoor spaces, such as warehouses, construction sites, exhibitions, wedding events, open-air dining venues, etc., especially in cold seasons or bad weather conditions. This heater can provide stable and powerful warmth.

Suitable for outdoor or indoor use?
Due to its high power and gas-driven characteristics, the Stand Square Heater is more suitable for outdoor use. In outdoor venues, especially where there is no stable power supply, using gas as an energy source can ensure the continuous operation of the heating equipment. In such environments, the Stand Square Heater can provide greater heating capacity through its efficient heat output and gas consumption rate. Especially in winter outdoor activities, such as markets, open-air parties, construction sites, etc., the Stand Square Heater can quickly provide warmth to large open areas.

However, the Stand Square Heater can also be used in large indoor places, especially those with large areas such as warehouses and workshops. These places usually lack central heating systems. Using this gas heater can quickly increase the indoor temperature and improve the comfort of the working environment. However, if it is to be used indoors, special attention must be paid to ventilation issues to avoid safety hazards caused by carbon monoxide accumulation.

Safety precautions when using the Stand Square Heater
The Stand Square Heater uses gas as an energy source, so a certain amount of exhaust gas, especially carbon dioxide and water vapor, is generated during use. If the use environment is not sufficiently ventilated, the exhaust gas may accumulate, affecting the air quality. Especially in indoor environments, good ventilation must be ensured to avoid gas accumulation.

The high-power heating capacity of the Stand Square Heater enables it to quickly heat the surrounding air, but it also comes with a certain risk of fire. During use, the heater must not be placed near flammable items such as paper, cloth, wood, etc. Before use, check the surrounding environment to ensure that no flammable materials are close to the heater.

To ensure the normal use of the Stand Square Heater and extend its service life, it is recommended to regularly check the gas pipeline, gas joints, gas valves and the external structure of the heater. Checking for gas leaks is one of the keys to preventing fire.

The Stand Square Heater needs to be installed correctly before use. In particular, the gas pipes, gas valves and gas regulators equipped during installation should be correctly connected as required by the instructions to avoid the risk of gas leakage. During operation, the steps in the operating manual should be strictly followed, and never modify or adjust the equipment privately to prevent safety hazards.

The Stand Square Heater supports a variety of gas fuels, such as propane, butane and liquefied petroleum gas (LPG). It is crucial to choose the right type of gas according to the use environment. For example, in cold weather, it is more stable to use propane gas, while liquefied gas is more suitable for use in warm climates.

The power of the Stand Square Heater is 13KW, and it is designed to provide efficient heating performance. Long-term high power operation may cause the device to overheat, so you should avoid using the heater uninterruptedly for a long time, especially in a closed environment, and shut down or reduce the power setting in time to ensure safe operation of the device.